Hardware Review: Quest Q-Pro Pod System by LostVape
It’s been a little while since I’ve done a hardware review, and the timing couldn’t be better, because I’ve had the chance to check out LostVape’s new take on it’s popular “Orion” Pod device, the “Q-Pro”.
Big thanks to LostVape for sending this through.
The Q-Pro, or probably more formally the “Quest Pro” is a big improvement over the current series of “Orions” and “Q” series. You might not see it straight away, but there are a few very important upgrades that have been made, all in an effort to consolidate previous models and offer a more versatile device.
You might recall the original “Orion” Pod system, it made huge waves with it’s alternative design, somewhat resembling a walky talky, where other pods at the time were going for the “stick” look. LostVape have kept with the original design, but have not stopped improving it over time, following on from the “Orion” to the “Orion Plus”, then offering a cheaper version, the “Quest Q” and finally an upgraded version of that the “Q-Pro”.
It’s only gotten better, through each generation, so let’s take a look at the latest iteration!
Specifications and Features
- Size: 93x37x13.5mm
- Output: 8-24W (5 power levels)
- Battery: 950mAh (internal)
- Display: LED indicator
- E-liquid capacity: 2ml
- Pods: Refillable with replaceable coils – compatible with Orion coils and pods
- Top adjustable airflow
Of course you can also see the full specifications and product run down directly on the Lost Vape website.
Product Includes:
- Lost Vape Q-Pro device
- Q-pro pod
- 1ohm regular coil (installed)
- 0.5ohm regular coil
- Lanyard
- USB cable
- User manual
Photos
Preface
So after the original “Orion” was released, a wave of other POD devices from other companies came out, with a similarly designed chassis. The Smok Trinity Alpha, Geekvape Frenzy, Orchid Pod System, along with several others have adopted the “Orion’s” revolutionary design of basic rectangular metallic frame with a large pod that clips into the top of the chassis, which is held in by a slide clip on the side. The size and shape of the “Orion” allowed for a much larger battery, control board, and e-liquid capacity than previous Pod devices, which I presume was the elure of this style of device.
These other companies saw small improvements in their devices over the original “Orion”, they were cheaper, with larger capacity PODs and probably more importantly, removeable coils, which was a very welcome move from a tonne of consumers.
Lost Vape returned with the “Orion Plus” Pod System, bolstering a 22W maximum power output, removeable coils, and an upgraded DNA GO chipset, but for some was simply still too expensive due to it’s Evolve technology.
Next came the “Quest Series”, with a proprietary controller, but more importantly a much cheaper price tag. This was however limited to no power output adjustment, and still had limits to it’s pod and coil usage, only being able to use Quest Pods, original pods wouldn’t fit.
You can start to appreciate that there is a little bit of history here, and a whole mess of compatibility that has plagued Lost Vape’s products since the original Orion. But, this is where it’s all about to change.
The new “Q-Pro” is a benchmark device, designed to reset the complexity, and make some sense from all of the previous used Pods and coils, because this thing, takes them all. It is also the equivalent to what the “Orion Plus” was to the original “Orion”.
You can use original “Orion” Pods (that had no replaceable coil), Orion Plus Pods and Coils, Orion Q Pods, as well as the newly created Q-Pro 1.0 Ohm coil.
If you’re confused about all of the Orion products and need some clarification, there are x2 series.
The Orion Go and the Orion Go Plus are both DNA chipset devices.
– Orion Series (DNA Go Chipset)
– Orion Go (All in one pod)
– Orion Go Plus (Removeable coils)
The Quest’s (Q and Q-Pro) have a proprietary Lost Vape Chipset in them.
– Quest Series (Proprietary LostVape chipset)
– Q (Quest) (All in one pod)
– Q-Pro (Removeable coils)
The POD
As mentioned earlier, the Q-Pro POD is similar to the original Quest, it’s been carefully designed to be used with it also.
The device is backward compatible with all Pods and coils, and cleverly, the original Quest will be forward compatible with the new Q-Pro Pods and Coils.
The Q-Pro Pod has a 2ml capacity, just like it’s predecessors, the very same screw down fill port, and airflow adjustment from it’s proprietary drip tip.
The PODS are tinted, but it’s really easy to see your juice level without issues, and filling them is a breeze.
Just like the “Orion Plus” this has replaceable coils, so you won’t have to go out and purchase an entire new pod, just coils, and only the ones that suit your vaping style.
With a choice between 0.25 Ohm Mesh coils, 0.5 Ohm Regular Coils, through to the new 1.0 Ohm mouth to lung coils released with the Q-Pro, every style of vaping is covered.
To change coils, take out the POD, unscrew the drip tip all the way, push the coil out from the top, and replace the same way. It really is super easy, a little confusing at first, but very much makes a lot of sense once you’ve done it the first time.
How do the pods go on the leak test?
I’ve had some great luck with the Pods and coils that came with the kit. I’ve not had a single leak, despite the occasional gurgle.
What about Airflow?
The airflow has me a little torn. While I admit to allowing a little wiggle room because this is a POD device, I’m finding that the airflow leaves a little to be desired. It’s not that it doesn’t have enough, or I cannot close it down for a nice MTL hit, because I can. I’m finding that the airflow is a little thin on this. The flavour to air ratio coming through is not condensed enough. Almost as if all of the air is not all being put through the coil, and the airflow control is a secondary inlet.
I notice that the airflow goes from the outside of the drip tip back through the pod, up through the coil and back up through the inside of the drip tip. So there isn’t a secondary inlet, but it sure does feel there is.
The saving grace here is the adjustable power output, and that I can get somewhat of a warm vape from it if I chain vape it, which eventually does satisfy me.
Using this for Direct to Lung inhales, can be quite loud. There are no whistles at all, just a distinct air through plastic type of sound. Obviously the more you open the air control the louder it gets.
Having the air control all the way open produces a very cool, unsatisfying vape for me, I have been closing it down a little for a warmer pull.
Using it for Mouth to Lung vaping is actually quite good. I can close the airflow right down for an almost cigarette style inhale. It’s a pleasant MTL vape, and the extra modes really do help to dial in a much better vape than if they were not there at all.
The Main Body
The frame of the “Q-Pro” is stainless steel, just like the original, finished in a sandblasted or billeted look, it’s sturdy, strong, and screams quality. There are no rattles, bumps, mis-shapen pieces, just working parts that do their job well. Inlaid in the stainless steel chassis, are panels, of which you can choose your style. From Stabilised Wood, to a weave, or a honeycomb design, you’ll definitely be able to find something that suits your style. The panels all fit snug, and are of some very nice patterns.
Being just 93 x 37 x 13.5mm puts this in the very comfortable zone, easily pocketable, and a delight to carry around with you. While not tiny, it is smaller than you’d think, you’ll barely notice it in your pocket due to it’s slimness, and it feels so very comfortable to hold, easy to wrap your fingers around.
Inside this stainless steel body, is a 950mah Li-Po battery, a powerful chipset with 5 power options, and a maximum output of 24Watts. There is a lot built into this tiny little device, and Lost Vape have done it with style, not scrimping on looks over operation.
The Pods, clip on and clip off easily enough, you’ll initially feel like you need to push the clip down before the pod actually goes into place, but quickly realise you can use a little force to simply push it in with a click.
Once the pod is in, you will need to use the latch however, as it’s very securely locked in place.
The siding or panels that I received are stabilised wood, and really do look and feel the part. They’re obviously a thin veneer, but look great and fit nicely.
Usage
To turn on the “Q-Pro” all it takes is 5 quick clicks of the fire button, which in turn, switches it off also. The feel of the button is great with a distinct action, and a very sleek steel finish.
You’ll also find a secondary button at the bottom which is used to switch between 5 modes. (White,Blue,Red,Green,Purple) Pressing this button will light up the mode LED telling you which setting it is on, and a second press will have you cycling through all of the options.
Using the 0.25 Ohm mesh coil, the modes correspond with these wattages.
White = 15 Watts
Blue = 17 Watts
Red = 20 Watts
Green = 22 Watts
Purple = 24 Watts
As you fire your “Q-Pro” the very same LED lights up to show you the level of your battery too, a dual purpose LED.
Blue = 65% – 100%
Purple = 18% – 64%
Red = 0 – 17%
A constant blinking of the light will tell you you’ve gone too low to fire the device.
Filling
Simple is best, and the best way to do something is simply. LostVape know this and a simple and elegant way to fill the pods has been used. I singular screw cap on the top of the POD unwinds and you can fill from the fill port.
When you’re done filling it, just screw the cap back on. No needing to worry about secondary air holes, or silicone caps, this just works.
Beware however, the threading on this cap is a little rigid and you might not catch the thread everytime, resulting in dropping it and possible loss. Be careful when putting this cap back on and you’ll be fine. This is something that is a small issue but I feel would make a big difference and improve things. Some way to stop that cap from flying off by itself, perhaps a small plastic strip to hold it much like fuel caps are held to a car.
The hole itself is large enough to not get a vaccum and have juice spill over, which is nice, truly a pleasure to fill.
Charging
Just like filling, charging is dead simple. Plug in your micro-usb and it’s on it’s way.
You’ll be charged from empty to full in a little over an hour, and ready to vape again.
One thing that threw me a little was that there is no pass-through. You cannot take a toot on the Q-Pro while it is charging. That’s a little disappointing, but not a complete deal killer, just a minor annoyance that I’ll learn to live without.
The placement of the charge port is great, and allows you to plug in without the device balancing over from the weight of the cable.
So how long will you get from a charge?
Of course that all depends on how you use it. Using the MTL coil you’ll get a few days out of it, if you don’t have it hanging off of your lip all day, and get a good few hours out of it if using the DTL coil.
Pros:
- Great Looking
- Largish pod for more juice
- Very comfortable to use
- Solid feel to it
- Replaceable coils
Cons:
- Fill screw can easily fall due to the threading being very refined.
Needs some type of restraint so that it can fall away without actually coming away from the pod. Like a petrol cap. - Provides a pretty cool vape, not a hot or warmer one. This can be countered a little by chain vaping on the highest setting for a warmer than usual vape.
Conclusion
I’ve enjoyed my time with the Q-Pro and can appreciate what a handy little device it can be. Often I’ve stepped out of the house with no jacket and the Q-Pro fits into Jeans pockets easily, without being bulky. It’s a satisfying vape for short trips and for going places that you cannot take a large 2 battery mod with you.
I really like the attention to detail that Lost Vape have engaged in, and made this classy little POD vape look the goods with the billet look stainless steel and stabilised wood panels, it really does look great. Just looking closely at the buttons and the fittings, it’s a very well built piece of kit.
It’s not going to be an all day device for me because I prefer to use mechanical mods, however this is going to get a good amount of use from me in the future, most likely as more of a Mouth to Lung device when I’m out and about and using a higher nicotine level. For a Direct Lung inhale it can be a little on the thin and tasteless side, but for a MTL device, it does quite well with plenty of flavour and a quality vape.
The final thing to talk about is price. There’s not a lot of information out there at the moment as this is still shipping to vape stores, but I’ve noticed a few offering it for about $36USD, which is a pretty great price for what you get. This is a quality product at a fantastic price point.
I’m fairly confident this is going to be a pretty sought after device, so if you’re interested in the LostVape Q-Pro, you’d better get on those presale lists!
Where to buy
You can pick this beauty up directly from LostVape by visiting the Lost Vape Online Store! It’s only $39.99 USD at the moment, so a pretty good price!
